Skip to main content
Stesso

Introduction and Tool/Material Overview

0:01
4:28
158.8K views

At 0:01 in

How to Repack or Repair A Graco Airless Spray Gun. Graco airless gun repairs.

Watch on YouTube

What happens here

The presenter introduces the task of replacing the packing kit on a Graco Contractor spray gun. He outlines the specific tools needed for the job, which include a 5/8 inch box wrench, a 9/32 inch socket, a crescent wrench, and possibly pliers for stubborn needle assemblies. He also identifies the replacement part as a new Graco packing kit, part number 288-488.

Tools and materials

  • 5/8 inch Box Wrench
  • 9/32 inch Socket
  • Crescent Wrench
  • Pliers
  • Graco Contractor Gun
  • Graco Packing Kit

What they say

Hide

Chris. Today in this video, we're going to show you how to replace the packing kit on a Graco Go contractor gun. In this task, you're going to need a 5/8 inch box wrench. I use to re uh remove the pin that goes through the trigger. I use a 9/32 socket and a crescent wrench. And then you're going to need possibly a pair of pliers to pull out the needle assembly if it's stuck in there pretty tightly. and we're going to be replacing it with a new packing kit, a Graco packing kit, which is a part number 288488.

Auto-generated from the video audio.