Skip to main content
Stesso

Introduction and Gather Tools

0:00
4:28
158.8K views

At 0:00 in

How to Repack or Repair A Graco Airless Spray Gun. Graco airless gun repairs.

Watch on YouTube

What happens here

The video begins by introducing the task of replacing the packing kit on a Graco Contractor Gun. The presenter then outlines the necessary tools, including a 5/8 inch box wrench, a 9/32 inch socket, a crescent wrench, and potentially a pair of pliers if the needle assembly is stuck. The specific Graco packing kit (part number 288-488) to be used for the replacement is also shown.

Goal: Understand the project and collect all required tools and the new packing kit.

Tools and materials

  • 5/8 inch Box Wrench — Loosening and tightening the knuckle guard and spring housing
  • 9/32 inch Socket — Loosening and tightening the nut for the trigger pin
  • Crescent Wrench — Holding the bolt while loosening the trigger pin's nut
  • Graco Packing Kit — Providing all new internal components for the spray gun
  • Pliers — Pulling out a stuck needle assembly

What they say

Hide

Chris. Today in this video, we're going to show you how to replace the packing kit on a Graco Go contractor gun. In this task, you're going to need a 5/8 inch box wrench. I use to re uh remove the pin that goes through the trigger. I use a 9/32 socket and a crescent wrench. And then you're going to need possibly a pair of pliers to pull out the needle assembly if it's stuck in there pretty tightly. and we're going to be replacing it with a new packing kit, a Graco packing kit, which is a part number 288488.

Auto-generated from the video audio.