Skip to main content
Stesso

Start Power Washer and Begin Operation

3:45
6:03
44.2K views

At 3:45 in

How to operate a Mi-T-M power washer. Pressure washing tips.

Watch on YouTube

What happens here

With the system purged and nozzle attached, ensure all engine controls (gas, choke, throttle) are set as previously instructed. To start the engine, firmly hold the trigger on the power washer wand to relieve pressure in the pump, and then pull the starter rope. Once the engine starts, the power washer is ready for use. The video demonstrates stripping peeling paint from the aluminum siding of a house using the high-pressure stream.

Goal: Safely start the power washer and effectively strip paint.

Tools and materials

  • Power Washer MITM — The main unit for paint stripping
  • Power Washer Wand/Gun — To control the water flow and pressure

What they say

Hide

it's a lot easier to start the engine if you're pulling the trigger and holding the trigger like this. If you don't pull the trigger, there's a lot of pressure behind the engine um when you actually go to start it. So, it's in the on position. Everything's ready to go. That's how you started running. We'll go over here and just show you what we're actually doing here. Stripping this paint here. Um Heat. Heat. here. Couple

Auto-generated from the video audio.