Second Pass Routing: Outline 'YouTube' and 'Subscribe' Elements

3:11

15:16

262K views

At 3:11 in

How To Make A Wood Sign. Sign Making Tips With A Router.

Watch on YouTube

What happens here

After completing the main logo's red outline, adjust the router's depth to a deeper setting. With the SC50 Whiteside bit still in place, proceed to route the red outlines for the 'YouTube' and 'Subscribe' elements. This creates a slightly deeper recess for these elements, adding another dimension to the sign. Pay close attention to following the vinyl lines accurately.

Goal: Rout the red outlines of the 'YouTube' and 'Subscribe' elements at a deeper depth.

Tools and materials

Router DeWalt — Carving the design into the wooden board
Safety Glasses — Eye protection during routing
SC50 Whiteside Bit Whiteside — Creating fine and intricate cuts for the design outlines

What they say

(376 characters)

Hide

router bit a little bit deeper. Here we go. So, what I've done here is I've cut away all of my detailed red lines. I'll come back um on on a future scene and I'll cut this stuff away. But what I'm going to do now is I'm going to do the same thing I did here. I'm going to cut around these letters and I'm going to cut away all of this red. That's my next step. So, here we go.

Auto-generated from the video audio.