Program Gate Limits, Remote, and Auto-Close

What happens here

With all components wired, close the control box. Access the control board for programming. Use the 'Jog Open' and 'Jog Close' buttons to manually move the gate to its desired fully open and fully closed positions. Press the '1st Set' and '2nd Set' buttons (or equivalent as per manual) to program these limits. Next, program the remote control by pressing the 'LEARN XMTR' button and then the desired button on your remote. Finally, set the auto-close time by pressing the 'SET AUTOCLOSE TIME' button until the desired delay (e.g., 30 seconds, 60 seconds) is reached, indicated by corresponding LED flashes or settings.

Goal: Configure the gate opener's operational settings