Prepare Gate Post and Install Hinge Bolts
2:46
22:08
159.5K views
At 2:46 in
How to install automatic gate opener
What happens here
Mark the positions for the gate hinges on the main wooden gate post. The presenter indicates a distance of approximately 7.5 inches between the hinge points on the gate itself. Transfer these measurements to the wooden post, marking precisely where the holes need to be drilled. Use the spade bit with the impact driver and extension to drill through the entire thickness of the wooden post at the marked locations. Insert the long hinge bolts through the drilled holes.
Goal: Drill holes and install hinge bolts on the gate post
Tools and materials
- DeWalt Impact Driver DeWalt — Drilling holes
- Extension for Drill/Driver — Extending the reach of the spade bit
- Hinge Bolts — Securing the gate hinges to the post
- Marker/Pencil — Marking drill locations on the post
- Nuts — Securing the hinge bolts
- Spade Bit — Drilling holes for the hinge bolts
- Tape Measure Stanley — Measuring hinge spacing and marking drill points
- Washers — Distributing pressure under the bolt head and nut
- Wooden Gate Post — Anchor point for the gate