Connect Solar, Actuator, and Battery Wiring
At 18:36 in
How to install automatic gate opener
What happens here
Mount the solar panel bracket to the gate post, usually above the control box, ensuring it is positioned to receive maximum sunlight throughout the day. Secure the solar panel to its bracket. Run the solar panel's wires down the post and connect them to the appropriate 'SOLAR +' and 'SOLAR -' terminals on the control board inside the control box. Similarly, connect the actuator's wires (typically red, white, black, green) to their designated terminals (e.g., '1st OPERATOR', '2nd OPERATOR') on the control board. Then, connect the battery leads (red for positive, black for negative) from the battery box to the 'BATTERY +' and 'BATTERY -' terminals on the control board.
Goal: Wire all electrical components to the control board
Tools and materials
- Actuator Arm Ghost Controls — Provides power to the gate motor
- Battery — Powering the gate opener system
- Battery Box Ghost Controls — Houses the 12V automotive/marine battery
- Screwdriver — Tightening terminal screws on the control board
- Solar Panel Bracket Ghost Controls — Mounting the solar panel
- Solar Panel Ghost Controls — Charging the system's battery
- Wire Strippers — Stripping wire insulation for connections