Install New Outlet and Cover Plate

All righty. So, we now got our outlet back together right there. We have now the data box back together. It looks like nothing happened, everybody. And then now, as you can see, we have our wire secure. Our new old workbox installed. And look at that, everybody. Looks like nothing happened. So, we are about to now strip the jacket of this ROMX and install our outlet. So, stay tuned. All right. So, we have our outlet all wired up. Just want to show you guys, you know, to double check. So, the black wire goes to the gold terminal. All right. The white wire goes to the silver terminal and the copper wire goes to the green terminal. And I only have one ROMX, everybody. And this ROMX, just to clarify, is going to that outlet over there. So, I'm getting power from that outlet below, and it's going to this outlet up here. And the wire is being fished through the wall as I was able to get my wire um through this blank plate over here. Before it was a data box not being used. I put a jumbo plate. And there we go, guys. Just like that. And we sleeved our wire through the wall. We're almost done here, guys. Now, time to put the plate cover on.