Skip to main content
Stesso

Assess Panel and Prepare Drywall

0:07
3:15
2.9K views

At 0:07 in

HOW TO INSTALL A CHARGEPOINT NEMA 14-50R IN 3 MINUTES!

Watch on YouTube

What happens here

Begin by identifying the type of electrical panel you have. In this case, the panel is a flush-mounted type, meaning it's recessed within the drywall. To access the interior of the wall for wiring, you will need to carefully cut a section of drywall near the electrical panel. Use a drywall saw or an oscillating multi-tool for this task. Additionally, determine the location for the NEMA 14-50R outlet and the ChargePoint EV charger unit, ensuring they are conveniently placed for the vehicle.

Goal: Determine panel type and open wall for wiring access

Tools and materials

  • Drywall Saw — Cutting open the drywall for wire access
  • Electrical Panel Cutler-Hammer Eaton — The main electrical supply for the house, where the new circuit will be connected
  • Safety Glasses — Protecting eyes from debris during drywall cutting
  • Stud Finder — Locating wall studs to drill through and avoid existing utilities

What they say

Hide

All right, I'm going to show you guys how to install a level two electric vehicle charger. There is a charge point. All right, guys. So, first thing you want to do is you want to establish what type of electrical panel you have. Do you have a flush mounted panel or do you have a surface mounted panel? In this case, we have a flush mounted panel because it's in the drywall. So, we had to cut the drywall. Now, here is my brother Ken. He is a journeyman electrician. I'm an apprentice and he

Auto-generated from the video audio.