Correct Drywall Screw Placement

1:02

1:31

56.9K views

At 1:02 in

How to hang drywall

Watch on YouTube

What happens here

When fastening drywall, begin by placing screws in the center of the panel and then work your way outwards. For tapered ends, screws should be placed approximately 3/8 of an inch from the edge. In the 'field' (the main body of the drywall panel), screws should be spaced every 12 inches. For butt ends, screws should be placed approximately 5/8 of an inch from the edge and spaced every 8 inches. Ensure that all screws are driven slightly below the surface of the drywall without breaking the paper facing.

Goal: Securely fasten drywall with correct screw spacing and depth.

Tools and materials

Cordless Impact Driver Milwaukee FUEL — Driving drywall screws
Drywall Screws — Fastening drywall
Drywall — Demonstrating screw placement
Pencil — Marking screw locations
Tape Measure Milwaukee — Measuring screw placement

What they say

(521 characters)

Hide

the bottom of your drywall so moisture doesn't go up into your drywall. When you go to screw up your drywall, always start in the center and work your way out. Fasten your drywall 3/8 of an inch on your tapered end and put a screw every 12 inches in the field. Working on the butt end of your drywall, put your screws 5/8 of an inch in and put them every 8 inches. So, I know the drywall looks extremely dirty and used and it has a bunch of holes everywhere. That's because it is. It was hanging on the ceiling up here. I

Auto-generated from the video audio.