Skip to main content
Stesso

Mask Off the Repair Area

3:47
6:36
395.8K views

At 3:47 in

HOW TO FIX A PAINT RUN. Painting hacks repairing drips & runs. Fixing paint sags.

Watch on YouTube

What happens here

Once the sanding is complete and the surface is smooth, it's time to prepare the area for re-spraying. This involves carefully masking off a logical, entire section of the trim or column. The presenter explains that you cannot simply spray only the repaired spot, as this will create a visible 'dry feathered edge' where the new paint meets the old. By masking off and spraying a complete section (e.g., the entire face of a column), you ensure a seamless blend and a professional finish.

Goal: Prepare the area for re-spraying by masking off a full section

Tools and materials

  • Masking Paper/Plastic Sheeting — Protecting adjacent surfaces from overspray
  • Masking Tape — Defining the boundaries of the area to be sprayed

What they say

Hide

So, now that we got it all sanded off, you can see how it's masked off. You got to uh determine a section where you can mask off a whole section and respray a whole section cuz you can't just spray just the spot you sanded cuz it'll leave a dry feathered edge around that spot where you're spraying. So, we found a nice logical place where we can mask it off. And so, we're going to shoot this whole face of this column. But, I'm going to shoot one shot right across where our touch-up is first. We're going to let that dry and then re-shoot the whole face because the first shot's going to fill in those areas where we actually sanded and hopefully it smooths out those ridges. Ready? First coat on

Auto-generated from the video audio.