Second Full Cleaning Cycle
At 4:21 in
HOW TO CLEAN A Titan Wagner or Graco Airless Paint Sprayer after oil based paints.
What happens here
Once the initial clean spirits in the 'clean' bucket become milky from cleaning, dump these dirty spirits into the 'dirty' bucket. Refill the 'clean' bucket with another half-gallon of fresh mineral spirits. Repeat the flushing process: place the intake pump into the new clean mineral spirits, and alternate running the sprayer through the gun and the prime tube into the 'dirty' bucket. Continue this until the discharged spirits are completely clear. Take the intake screen (rock guard) again and swish it in the fresh clean mineral spirits one more time to ensure it is spotless.
Goal: Thoroughly rinse all internal components of the sprayer to remove all paint residue
Tools and materials
- Airless Paint Sprayer — Operating the pump and spraying cleaning solution
- Clean Bucket — Supplying fresh mineral spirits to the pump
- Dirty Bucket — Collecting flushed dirty mineral spirits
- Intake Screen — Being cleaned of paint residue
- Prime Tube — Flushing out remaining paint
- Spray Gun with Extension — Directing the discharge during flushing
- Paint Thinner/Mineral Spirits — Refilling the clean bucket for the second cleaning cycle
What they say
(937 characters)Hide
What they say
(937 characters)Auto-generated from the video audio.