Initial System Flush with Mineral Spirits
At 2:27 in
HOW TO CLEAN A Titan Wagner or Graco Airless Paint Sprayer after oil based paints.
What happens here
Place the sprayer's intake pump (also referred to as the pump or hose that draws material) into the 'clean' bucket containing fresh mineral spirits. Engage the sprayer to begin cycling the mineral spirits through the hose and out of the gun. Direct the output of the spray gun into the 'dirty' bucket. Watch the discharge carefully; you will see the oil-based primer or paint being flushed out, gradually thinning until only clear mineral spirits are visible. It is critical to keep the metal extension of the spray gun touching the metal 'dirty' bucket (or another grounded metal can) during this process to prevent static discharge, which could lead to a fire or explosion.
Goal: Remove oil-based primer from the sprayer's hose and gun
Tools and materials
- Airless Paint Sprayer — Operating the pump and spraying cleaning solution
- Clean Bucket with Mineral Spirits — Supplying clean mineral spirits to the pump
- Dirty Bucket — Collecting flushed dirty primer and mineral spirits
- Spray Gun with Extension — Directing the discharge during flushing
What they say
(761 characters)Hide
What they say
(761 characters)Auto-generated from the video audio.