Skip to main content

Patch the Injection Holes

5:30
10:58
29.2K views

At 5:30 in

How they raise & level Sunken Concrete with foam 4 k video

What happens here

Once the concrete slab has been lifted to the desired level, complete the job by patching the small injection holes. First, remove the HMI Elite 1 injection gun from the zert, and then carefully pull the zert out of the hole. Mix a small amount of sand and cement to create a patching compound. Use this compound to fill the 5/8-inch holes, ensuring a smooth, flush finish with the surrounding concrete. This leaves a minimal and clean repair, addressing the problem without requiring slab replacement.

Goal: Seal the injection points for a clean and finished appearance.

Tools and materials

  • HMI Elite 1 Injection Gun HMI — Removed from the zert
  • Small Bucket/Container — To mix patching compound
  • Trowel/Spatula — Applying patching compound
  • Zert — Removed from the hole
  • Cement — Component of the patching compound
  • Sand — Component of the patching compound
  • Water — To mix with sand and cement for patching

What they say

Hide

declare victory on his lip and he moves on to the last part of the process remember I said drills from patch he merely reduces gun foot is hurt posted third up out and then catches his hole with a little mix of Portland the sand and he is corrected the problem and instead of ripping the slant reporting a new slab he has in a matter of minutes corrected the problem and double repair highly efficient very very possible and for the property owner incredibly efficient because usually bosses one half the cost of the replacement polyurethane contradicting commendeth addition to existing tensions as an additional profit service now let's talk about filling the concrete or about

Auto-generated from the video audio.