Skip to main content

Address Board Discrepancies & Maintain Gaps

5:50
20:02
29K views

At 5:50 in

How NOT to install Hardwood Floors- Before during & After including all our screw ups

What happens here

As you lay the flooring, you may encounter planks that are slightly wider or narrower than others, leading to noticeable gaps between boards. It is important to inspect each plank before installation and discard or set aside any that have significant width discrepancies. If a gap appears, attempt to unlock the affected planks and find a better fitting piece. If this is not addressed, gaps will continue to propagate across the floor. To create a random pattern, pull planks from different boxes and vary the length of the starter pieces for each row. This avoids a repetitive or 'stair-step' appearance.

Goal: Ensure tight plank joints and create a visually appealing random pattern.

Tools and materials

  • Engineered Vinyl Plank Flooring COREtec — The primary material being installed
  • Rubber Mallet — Gently tapping planks for proper fit

What they say

Hide

to waste you'll cut it you'll see if it fits and then if it fits then we transfer the marks to a fresh piece of wood and do it on the bottom side it's not a bad thing you screwed up wow these guys may not make that same mistake all right so Frankie we've got a he's making his scribe cuts and we've got to leave three-eighths of space so let's see how close he's able to get with this thing that little tiny gap were you talking [Music] one of the things I got it's not four floors window door and siding polyurethane sealant the reason I got this it's permanently flexible it will never kind of solidify so to speak but more importantly it expands and contracts with material permanently so as this floor is floating and breathing this stuff will move with it in theory we will find out I'll let you know in 20 years how holds up make sure you subscribe and come back because 20 years you know I'll tell you all about how well this silicone works more year or a year so this is where we need to see

Auto-generated from the video audio.