Skip to main content
Stesso

Reinstall Pavers and Compact (Large Area)

6:28
15:09
124.1K views

At 6:28 in

How NOT to build a paver patio. Why they FAIL and how to do a DIY repair on landscaping. 4 k video

Watch on YouTube

What happens here

Carefully place the original pavers back onto the newly leveled sand bed. The pavers should be laid tightly against each other, following the existing pattern as closely as possible. Avoid dragging pavers across the leveled sand, as this can create grooves and unevenness. Once all pavers are laid in the repaired section, perform a final compaction. Use the vibratory plate compactor to run over the surface of the newly installed pavers. This process sets the pavers firmly into the sand bed, locks them together, and helps achieve a uniform, stable surface.

Goal: Securely place pavers onto the sand bed and compact them to create a stable, even surface.

Tools and materials

  • Pavers — The main surfacing material of the patio
  • Rubber Mallet — Gently tapping individual pavers into place
  • Vibratory Plate Compactor — Final compaction of the installed pavers

What they say

Hide

easy way to blend an existing patio over the top of a repair section and make sure that everything flows together really well [Music] so you're gonna notice that we've also given up at this point on trying to duplicate that pattern exactly the way that it came out what I'm talking about is in the beginning of this video you notice that we had peeled apart the patio rebuilt it and then we were going to just reinstall it so that we had to make zero cuts and on a small area that works but when you start to get into these bigger areas it becomes too time costly and so what the guys are doing at this point is they are reusing the existing blocks they're reusing the existing pattern but the blocks aren't going back in in the exact same way that they came out what this might lead to is making a few extra cuts at the very end of the job meaning that for them to pull this off successfully they will need potentially need a few extra blocks to cut to be able to do that we've got to finish this paver patio up the same way we would do a brand new installation and that's by packing the top of it by packing the top of it we've settled everything in and that also locks everything together now this was an old patio that got repaired and the old patio used standard joints and you guys can upgrade in this might be a

Auto-generated from the video audio.