Reinstall Headlight Bulb, Retainer Clip, Boot, and Connector

it just was a little bit loose there okay so we've taken this out like this well this flat side is going to go down on the bottom okay so we're going gonna take this we're gonna put it back in everything looks good i'm really hoping that it's just something was a little bit loose there like i don't know does anybody else have any ideas of why this was doing that so you can see that this clip down in here it's on and it's really everything in there is pretty tight so if you guys like the content please subscribe to the channel and i really could use a little help here i'm just wondering why first question because i don't know that i've ever seen this and i guess i haven't really changed so many light bulbs in my time but what is the paste i mean is it like a conductor type paste like something that you would put on electric like i know um whenever i've done water heaters in the past and i've had like aluminum lines they had like some conductivity paste or something that you would put on those when you hook up the other wire heater with the copper so i mean maybe it's something like that i don't know i'd love to know please somebody could help me out with that it'd be great and then the second thing is has anybody else had any other issue like this where your light's not broke and it just goes on and off once in a while we're just gonna go ahead and put this bad boy back in place so you just kind of get it around the middle of that just make sure it's around the light bulb itself and then it just kind of pops in place just seals right in there super easy so