Finishing End Rows and Handling Obstacles

What happens here

When you reach the final rows of a room or encounter areas where a traditional flooring nailer cannot be swung (e.g., near walls or obstacles), alternative fastening methods are required. You can either 'top nail' by driving nails through the face of the board (holes will need to be filled with wood putty later) or 'blind nail' by driving nails at an angle into the tongue of the board, which conceals the fasteners. For boards over 5 inches wide or for critical end rows, it is often recommended to use a full spread of a polyurethane-based adhesive in addition to nailing for enhanced stability.

Goal: Securely fasten hardwood planks in tight spaces and challenging areas.