Skip to main content
Stesso

Install Eye Bolts into Bed Frame

5:45
10:17
100.1K views

At 5:45 in

HANGING BED. How to make a bed that hangs from a ceiling. Making a swinging bed.

Watch on YouTube

What happens here

Carefully measure and mark the locations for the four 3/8-inch x 7-inch eye bolts on the bed frame, typically at the corners. Drill pilot holes through the 1x8 pine slats and into the underlying 2x4 frame using a drill bit slightly smaller than the eye bolt's shank. Insert each eye bolt through the drilled hole, ensuring it passes through both the slat and the 2x4. Secure it from underneath with a 5/16-inch washer and a nut, tightening firmly to prevent loosening.

Goal: Drill holes and install eye bolts with nuts into the bed frame's corners to serve as rope attachment points.

Tools and materials

  • Impact Drill/Driver
  • Tape Measure
  • Eye Bolt Sets
  • Washers

What they say

Hide

okay now we're going to install the eyelets in here that this thing is going to be hanging from and we're going to be drilling a hole right down through here we're going to go right through the 2x4 that's underneath here and then those eyelets are going to come up through here and that's where our rope's going to be looped and hanging to so i'm going to i've got to find the center of this 2x4 in here i'm just gonna be measuring taking some measurements this is the two by four is actually an inch it's an inch and a half wide and this thing is overhanging by an inch i'm gonna measure it in an inch and then measure my inch and a half and split that right in the middle and that's where i'll be drilling that hole so now i've got my hole drilled through here just going to stick our eye bolt right through there i'm going to put a washer on there then screw my nut on there and now it's going to hang just like that so now in order to

Auto-generated from the video audio.