Skip to main content
Stesso

Excavator Overheating and Fan Belt Replacement

11:57
17:06
42.8K views

At 11:57 in

Failing to Build a Bomb Shelter #1

Watch on YouTube

What happens here

During the backfilling process, the Daewoo Solar 75V excavator unexpectedly overheats. Upon inspection, the crew discovers that the fan belt has snapped, causing the cooling fan to stop working. This halts the project temporarily. The operator, Alex, uses his phone's flashlight to inspect the engine compartment and locate the broken belt, noting the difficulty of threading a new belt around the fan due to limited access. He estimates the belt size is needed from a parts store like NAPA.

Goal: Diagnose and repair the excavator's cooling system to resume work.

Tools and materials

  • Daewoo Solar 75V Excavator Daewoo — The equipment requiring repair
  • Phone — Illuminating the engine compartment for inspection
  • Replacement Fan Belt NAPA — To replace the broken fan belt

What they say

Hide

going on with her what happened yeah the belt's gone the fan's not even spinning wow that's why it's overheating oh geez there's no belt in the belly there i can see a belt down there yep you can see it laying there oh yeah there it is so we need to know what size belt nampa apple might have it you know which is how do you get how do you get to it right yeah i didn't get to see what it was hooked on we'll figure it out though it's that pulley on the bottom there see that bottom pulley on the back side there there's another groove for the belt see on there's that pulley on the front there and then on the back side

Auto-generated from the video audio.