Skip to main content
Stesso

Mount Electrical Boxes

0:02
1:24
394K views

At 0:02 in

Electrical roughed in

Watch on YouTube

What happens here

Begin by mounting electrical boxes in their desired locations on the wall studs. The video demonstrates using a box with integrated drywall guides; these guides should be bumped flush against the face of the stud. This ensures the box will sit flush with the finished drywall, as these guides typically measure 0.5 inches (1/2 inch) to account for standard drywall thickness. Use a hammer to secure the box by pounding its integrated nails into the stud. Always consult local electrical codes for proper box placement and height requirements.

Goal: Install electrical boxes in the correct positions on wall studs, ensuring they will be flush with future drywall.

Tools and materials

  • Electrical Box — Housing for switches, outlets, or other electrical devices
  • Hammer — Pounding the integrated nails of the electrical box into the stud
  • Wall Studs — The structural framing members to which electrical boxes are attached

What they say

Hide

Here's how to run electrical. Let's get after it. Step one, mount your boxes where you want them. Make sure you read your local code to know where your boxes should be. There's these little stickouts here. That's for your drywall. So, you're going to put this on your stud and bump it right up to here. Then that's way that allows the box to sit flush with the drywall. These measure half an inch. So, put that on there. Slide it back to where those touch the stud. Take your hammer and pound them in. After you went around and installed all

Auto-generated from the video audio.