Replace Trimmer Head with Quick-Feed System (Optional Upgrade)

this is supposed to be an even easier head feed system we're going to replace this with a quick feed head system so let's see we've got to set that one all right so we've got to pull this assembly apart so we can put it back together that's easy okay so oh this is kind of cool let me show you something so this is how these strings go in okay so as you shove it in the hole it goes around and then back out and okay so basically it wraps around like that and this one wraps around like this that's what it looks like okay now on the new assembly it's more like a zip tie i believe don't quote me on that this part doesn't come off this part right here doesn't come off so don't take it off got two spacers and an aluminum housing and where you place these will determine your cutting height and it's not as adjustable as the other one but it's also a lot a lot more durable that's what it's built for right i'm gonna put one spacer above it then i'm gonna put my quick feed head and one spacer below it and then my mo ball there you go hey you guys want to see something zack's working up north here's the pictures he sent me this morning they're getting a bit of snow looks like he's got an inch of snow that's on the texas pride trailer so winter's not over yet okay so we've got the speed feed head on let's see what we gotta do okay that's it it slides in and you leave about a half inch on both sides and then she can't come out but it looks like i can pull this see it'll go one way but it won't go the other way it's like a zip tie right okay let's level her out and fill her with oil look what i found a bottle of sae 30 motor oil that looks good to go as long as it's sealed right you tell if you've got crap in your oil just by looking at it like this because i can't again an sae 30 heavy duty cleansing blah blah blah oil is recommended you pour your oil in right over your kitchen table because that's pretty normal and then you check it and whatever model you guys get this is the 875. just make sure you check to see how much oil you're supposed to add simple as that i screwed one thing up already i've noticed and that was when i was putting the cords in got me to wondering the cords that came with the original trimmer were really long and the cords that came with the quick feed head were a lot shorter so i did a little bit of looking and i realized i screwed up these quick feed cords you don't put two in you actually put four in and you don't pull them all the way through…