Skip to main content

Identify and Install an Old Work Box

0:11
1:28
8.2K views

At 0:11 in

Don’t buy the wrong box

What happens here

Next, the video demonstrates the 'old work box,' which is typically used in renovations or when installing an electrical box after drywall has been hung. This box features tabs that secure it in place once it's inserted into a pre-cut hole in the drywall. After cutting the hole, the box is pushed in, and screws on the front are tightened to extend the tabs, gripping the drywall from behind.

Goal: Understand and correctly install an old work electrical box.

Tools and materials

  • Drywall Saw — Cutting the hole in the drywall
  • Old Work Box — Housing electrical connections after drywall installation
  • Screwdriver — Tightening the screws to secure the box

What they say

Hide

on before you hang your drywall. It attaches directly to your studs. This is called an old work box and it's commonly found in renovations or after the drywall goes up. These tabs secure the box in place. After you cut the hole in your drywall, push your box in, use the screws on the front to tighten the box. Not too tight, you don't want to crush your drywall. If you need two outlets, two switches, or a combination of both,

Auto-generated from the video audio.