Skip to main content
Stesso

Workpiece Preparation and Safety

0:42
1:33
5.1K views

At 0:42 in

Do you own a router but not really sure how it works? #diy #tools #home #homeowners #tips

Watch on YouTube

What happens here

Before starting any routing operation, always secure your workpiece firmly to a workbench using clamps to prevent movement during the cut. For safety, put on safety glasses to protect your eyes from flying debris. The video recommends performing cross-cuts (cuts across the grain) first, as these are more prone to tear-out, especially at the corners.

Goal: Prepare the workpiece and ensure safety before routing.

Tools and materials

  • Clamps Harbor Freight — Securing the workpiece to the workbench
  • Safety Glasses — Eye protection during routing operations
  • Workbench — A stable surface for securing and routing the workpiece
  • Workpiece — The material being routed

What they say

Hide

out and then come off about an eighth of an inch. Take an adjustable and just do a couple turns on there. And now, go ahead and throw this back on. Now, before you router your piece, make sure that you have it clamped down securely to your work bench. Put your safety glasses on. I like to do these cross cuts first and I work left to right. Cross cuts tear out the easiest on the corners here. This wheel right here is going to ride on your work piece. Now, you want to make sure that you let this router speed all the way up

Auto-generated from the video audio.