Skip to main content
Stesso

Executing the Routing Cut

0:54
1:33
5.1K views

At 0:54 in

Do you own a router but not really sure how it works? #diy #tools #home #homeowners #tips

Watch on YouTube

What happens here

Ensure the router's bearing wheel (or guide) rests on the workpiece to maintain a consistent depth. Before making contact with the wood, allow the router bit to spin up to its full Revolutions Per Minute (RPMs). Then, move the router from left to right across the workpiece in a steady motion. This technique helps achieve clean corners and minimizes tear-out. After the cut, inspect the routed edge for smoothness and accuracy.

Goal: Perform a smooth and clean routing cut on the workpiece.

Tools and materials

  • Cordless Trim Router Milwaukee — Making the cut on the workpiece
  • Workpiece — The material being routed

What they say

Hide

cross cuts first and I work left to right. Cross cuts tear out the easiest on the corners here. This wheel right here is going to ride on your work piece. Now, you want to make sure that you let this router speed all the way up in RPMs before you start your cut. As long as you work left to right, you'll have nice clean corners. So, remember, keep your base flat, move

Auto-generated from the video audio.