Mix Concrete and Apply First Layer

What happens here

In a mixing tub (or wheelbarrow), pour the Quikrete Maximizer concrete mix. Gradually add water according to the manufacturer's instructions on the bag. The key is to avoid adding too much water, as this can reduce the concrete's tensile strength and increase the likelihood of cracking. Mix the concrete thoroughly using a hoe until it reaches a 'pudding' consistency – thick enough to hold its shape but still workable. Once mixed, apply the first inch of concrete evenly across the bottom of the prepared mold. Work the concrete into all corners, edges, and details of the mold to ensure a uniform surface.

Goal: Properly mix and apply the initial layer of concrete to the mold