Skip to main content
Stesso

Clean Soaked Parts

5:06
11:06
65.2K views

At 5:06 in

Cleaning A Graco Contractor II Gun. Repair an Airless Spray Gun.

Watch on YouTube

What happens here

Allow all disassembled parts to soak in the lacquer thinner for approximately 5 minutes. After soaking, use the old toothbrush to vigorously scrub all components, ensuring all dried paint and debris are thoroughly removed. Continue scrubbing until the parts are visibly clean. Once cleaned, they are ready for reassembly.

Goal: Thoroughly clean all disassembled paint gun components.

Tools and materials

  • Old Toothbrush — Scrubbing and cleaning various components
  • Plastic Cups with Lacquer Thinner — Holding and cleaning parts

What they say

Hide

packings. So, we'll let those soak for about 5 minutes, begin cleaning them with my toothbrush. And then once I got it cleaned, we're going to see I like either use a gallon can or one of these plastic little cups for cleaning and whatever is easiest and more convenient. It's been soaking in here for about 5 minutes. And I'll just begin cleaning all these parts with my toothbrush and get them all good and clean. Lacquer thinner loosens up all this latex paint. Makes it come off really easily.

Auto-generated from the video audio.