Cut Chevron Panels and Prep Wood

tank tops the best way not to waste material is i think each board i'm gonna have to individually cut it 45 degrees and then be very strategic to to do these glue ups so the miter 45 degree here i it still takes away too much material this is supposed to be a 45 inch door and i made all those cuts okay so i got a last minute idea and i cannot believe this works so if we move the angle from 45 to 30 nothing much check out what happens i want to get these smoother so i have a thickness planer i'm going to run these boards with a thickness blender so i get rid of a lot of these imperfections though the thickness planer did get rid of the radius they're still a little bit here's what i'm going to do you don't have to do but what i'm going to do is i'm going to throw it on my thick on my joiner here and what it's going to do is it's going to create take like a 16th why don't i keep saying create you're going to take a 16th of an inch off creating an on both sides creating a nice