Apply Pre-Stain and Gel Stain

when it comes to staining wood species like pine or douglas fir or maple even it tends to be blotchy a pre-saint essentially creates this uh almost like a gel like coating to allow for these stain itself to be absorbed almost like a little bit more of an even rate apply nice even coat let it sit there for i believe the instructions say like couple of minutes um and then wipe off the rest off and then we'll be ready to uh put some stain on first coat of a conditioner or pre-stain as like to call it is on excess was wiped off after sat for about 10-15 minutes stain this is the go-to stuff i've used it on sliding binding door barn band or barn or that's how you say that word i've used it on the bottom part of the kitchen island irena's approved go-to stain i refuse to try anything else because she's probably not gonna like it give it a coat flip her over she'll be done so i got really excited with the stain and irena came home double checked with her turns out i used the wrong stain she wanted fruit wood from minwax and um what does that mean i have to sand this all down again strip it down [Music] finally the right stuff this is the stuff we need okay so everything's stained this is the hardware that i got