Final Test Fitment of Crossover Pipe and BOV (Underneath)

24:30

37:24

62.5K views

At 24:30 in

Budget Turbo Yukon XL "Uncle Rob" Gets TiAL Wastegate & BOV Installed! (Single Turbo Kit Fab Tips)

Watch on YouTube

What happens here

With the manifold secured, perform a final visual inspection of the crossover pipe and BOV assembly from underneath the vehicle. Verify that the BOV is correctly positioned, has adequate clearance from all other engine components and the chassis, and that all connections are tight. This final check confirms the successful installation of the blow-off valve.

Goal: Confirm successful installation and clearance of the BOV assembly.

Tools and materials

Crossover Pipe Assembly — The final installed assembly
Safety Glasses — Eye protection during inspection

What they say

(713 characters)

Hide

with the crossover bolted in everything fits up good the way it was supposed to got that tightened up there i know they're really close to the training lines consider this this transmission is going to melt almost instantly so i'm really not worried about that hopefully this fits around a 480 it should have made it have extra room down here you know in this bend here it's going to have a good priority i don't want to stick it straight down because then it's like the lowest point on the frame and that's not good actually i'm just gonna consult a couple of my friends who have crossover set up this way and see what they did as far as their angle goes because it's working for them mostly dylan uh digging z71

Auto-generated from the video audio.