Skip to main content
Stesso

Apply Sealer to Stone

0:49
4:13
122.3K views

At 0:49 in

Applying H&C Sealer To Decorative Stone. How to paint a house.

Watch on YouTube

What happens here

Spray the HNC Wet Look Clear Sealer onto the stone masonry. The goal is to apply a nice, heavy coat, ensuring the rock, brick, or stone is completely saturated. Continue spraying until the material begins to pull and soak into the stone. While one coat is usually sufficient for sealing, a second coat can be applied if a shinier finish is desired after the first coat has dried.

Goal: Completely saturate the stone with the wet look sealer.

Tools and materials

  • Airless Sprayer — Applying the sealer
  • Cardboard Shield — Protecting adjacent surfaces during application
  • Rackex Fine Finish Tip — Controlling the spray for even, non-dripping application

What they say

Hide

Ow. Just using a Titan 440 airless sprayer to apply it at a pretty low pressure. Just using a 310 tip and see what the pressure is set at right here. Just going to be spraying on a nice heavy coat so the rock or your brick or stone is just completely saturated. And you can go back if you want it to be a little bit shinier after the first coat and give it a second coat. Usually one coat is good enough. You just want it to be completely saturated so you can see the stuff, you know, starting to pull on your stone and soak in. It's going to give your stone a really nice sheen to it. Nice wet look sheen.

Auto-generated from the video audio.