Skip to main content

Perform the Cut and Verify Fit

0:56
1:17
12.7K views

At 0:56 in

Angles for cutting crown flat

What happens here

With the miter and bevel angles correctly set on your miter saw, position the crown molding flat on the saw's table. For an inside corner, the wider 'bottom' edge of the crown molding should be against the miter saw fence. Carefully make the cut. Once both pieces for a corner are cut, test fit them together. If the calculations and saw settings were accurate, the pieces should align perfectly, forming a tight, seamless joint.

Goal: Cut the crown molding accurately and ensure a perfect corner fit.

Tools and materials

  • Crown Molding — The material being cut
  • Miter Saw Ridgid — Cutting the crown molding to the calculated angles
  • Safety Glasses — Protecting eyes from debris during cutting

What they say

Hide

calculate for 45°. Spring angle is 45°. Using our equation, we'll get 35.2° miter. I'm going to round down to 35, and our bevel is going to be 30. Cut. And if you did your math right, they should fit together like that. Your corner doesn't have to be 90°. Just divide your corner by two. Instead of using 45, just use whatever angle you have. So, instead of

Auto-generated from the video audio.