Skip to main content

Measure the Corner Angle

0:17
1:17
12.7K views

At 0:17 in

Angles for cutting crown flat

What happens here

Using a digital angle finder, measure the precise angle of the corner where the crown molding will be installed. The presenter demonstrates this on a 90-degree corner. Once measured, divide this corner angle by two to obtain the 'corner half-angle'. For a 90-degree corner, this would be 45 degrees. This value is critical for the upcoming trigonometric calculations.

Goal: Accurately determine the corner angle and its half.

Tools and materials

  • Digital Angle Finder Johnson — Measuring the interior angle of the corner
  • Dry Erase Marker U Brands — Writing down calculations

What they say

Hide

Believe it or not, these three. Don't worry, you don't need to know trigonometry. You just got to know what to punch into your phone. Let's start with 38° spring angle crown, and the complementary angle that we're using for this formula is 52°. Measure your corner. Mine is 90. Divide that by two, and you get 45. For your miter, plug this into your phone. Arc tangent cosine 52 / tangent 45, and that gives you your 31.6 miter.

Auto-generated from the video audio.