Skip to main content

Introduction and Understand Crown Molding Angles

0:00
1:17
12.7K views

At 0:00 in

Angles for cutting crown flat

What happens here

The video begins by introducing the task of cutting crown molding flat on a miter saw. The presenter holds up a piece of crown molding, explaining that the necessary miter and bevel settings are derived from trigonometry. He demonstrates a 38-degree spring angle crown molding (the angle it sits against the wall/ceiling) and notes its complementary angle as 52 degrees, which will be used in subsequent calculations.

Goal: Identify the crown molding's spring angle and its complementary angle.

Tools and materials

  • Crown Molding — Visual reference for understanding the spring angle

What they say

Hide

Where did the miter and bevel settings for cutting crown flat actually come from? Believe it or not, these three. Don't worry, you don't need to know trigonometry. You just got to know what to punch into your phone. Let's start with 38° spring angle crown, and the complementary angle that we're using for this formula is 52°. Measure your corner. Mine is 90. Divide that by two, and you get 45. For your miter, plug this into your

Auto-generated from the video audio.