Skip to main content

Calculate and Set the Bevel Angle

0:33
1:17
12.7K views

At 0:33 in

Angles for cutting crown flat

What happens here

Still using the scientific calculator, input the following formula to determine the bevel angle: `asin(sin(complementary angle) × sin(corner half-angle))`. For our example (38-degree spring angle, complementary angle 52 degrees, corner half-angle 45 degrees), the calculation is `asin(sin(52) × sin(45))`. This will result in approximately 33.86 degrees, which should be rounded up to 33.9 degrees. Set your miter saw's bevel (tilt) to this calculated angle.

Goal: Determine and apply the correct miter saw bevel angle.

Tools and materials

  • Miter Saw Ridgid — Setting the calculated bevel angle
  • Smartphone — Performing scientific calculations

What they say

Hide

For your miter, plug this into your phone. Arc tangent cosine 52 / tangent 45, and that gives you your 31.6 miter. And for the bevel, arc sign sign 52 * sign 45, and you get 33.8, rounded up to 33.9. But, what if you're not using 38° crown? Let's cut and calculate for 45°. Spring angle is 45°. Using our equation,

Auto-generated from the video audio.