stesso

Project

Take the new pop-up stopper and drop it into the sink drain opening from above. It's crucial to orient it correctly. The opening or loop at the bottom of the stopper's plastic or metal stem must be facing toward the back of the sink. This ensures that the pivot rod, when re-inserted from the back, will pass through it.

You're viewing a step from: How to Remove and Replace a Bathroom Sink Pop-Up Stopper

Beginner

30 minutes

2/4 Inventory

This guide provides comprehensive instructions for removing a malfunctioning or old bathroom sink pop-up stopper and replacing it with a new one. The process involves working under the sink to disconnect the linkage, removing the old stopper from the drain, installing the new stopper, and reconnecting the mechanism, followed by testing for proper operation and leaks.

Based on content fromHelpful DIY· 841K subscribers

Frequently Asked Questions

How difficult is it to replace a bathroom sink pop-up stopper for a beginner, and how long should it take?

This project is rated as 'beginner' difficulty. For most DIYers, it should take about 30 minutes to an hour, assuming no major complications like rusted or seized parts. Taking your time to understand the linkage and ensuring a good seal will prevent future issues.

What are the most common problems I might encounter when replacing the stopper, and how can I avoid them?

The most common issues are leaks after reassembly and difficulty with the pivot rod. To avoid leaks, ensure all connections, especially the nut holding the pivot rod, are tightened properly but not overtightened. If the old pivot rod is stuck, apply penetrating oil and let it sit before trying to remove it gently with your Husky 10 in. Quick Adjusting Groove Joint Pliers.

Do I need all the specific tools listed, like the Husky groove joint pliers or the Flateye flashlight?

While specific brands aren't mandatory, having a good pair of adjustable pliers (like groove joint or channel locks) is crucial for loosening nuts under the sink. A bright, hands-free flashlight, such as the Panther Vision FLATEYE, is also highly recommended as lighting under a sink cabinet is usually poor. These tools will make the job significantly easier and safer.

How can I prevent water leaks after installing the new pop-up stopper?

The key to preventing leaks is ensuring the new stopper assembly, especially the part that goes through the drain opening, is properly sealed. Most new stoppers come with gaskets, but applying a small bead of plumber's putty around the underside of the drain flange before inserting it can provide an extra layer of protection. Always test by filling the sink and letting it drain slowly, checking for drips immediately after installation using WYPALL L40 Towels.