Loosen the Set Screw and Remove the Stopper
Part of project
How to Remove a Stuck Bathtub Drain Stopper Assembly · Step 4 of 6
This guide provides comprehensive, step-by-step instructions for diagnosing and removing a stuck bathtub drain stopper assembly. The process involves identifying the stopper type, using lubricants to loosen it, disassembling the components, cleaning out hair and soap scum, and properly reassembling the unit.
3.7M subscribers
FAQs
How long should I wait for the penetrating lubricant (like Blaster PB Penetrating Oil) to work, and what if the stopper is still stuck afterward?
Allow the penetrating oil to soak for at least 15-30 minutes, or even a few hours for severely stuck components. If it's still stuck, reapply the lubricant, gently tap around the area with a rubber mallet, and try again. Avoid excessive force to prevent damaging the plumbing.
Do I really need specialized tools like the FlexiSnake Drain Millipede for cleaning, or can I use common household items for removing hair clogs?
While the FlexiSnake is highly effective for reaching deep clogs, you can often use a pair of needle-nose pliers or even a straightened wire coat hanger to carefully fish out hair and debris closer to the drain opening. Always wear gloves and properly dispose of the gunk you remove.
What essential safety precautions should I take when working on a dirty bathtub drain, especially regarding old gunk and chemicals?
Always wear protective gloves (rubber or nitrile) and safety glasses to shield yourself from drain gunk, potential splashing, and penetrating oils. Ensure good ventilation, especially when using lubricants, and have old towels ready to contain any mess.
The project is listed as 'beginner,' but what should I do if the stopper's set screw is stripped or the components are heavily corroded and won't budge?
If the screw is stripped, you might need a screw extractor kit or try using a Dremel to cut a new slot for a flathead screwdriver. For heavy corrosion, apply more penetrating oil and allow extra soaking time, gently wiggling the parts. If it still won't move, consider calling a professional to avoid damaging the plumbing.
Loosen the Set Screw and Remove the Stopper
Part of project
How to Remove a Stuck Bathtub Drain Stopper Assembly · Step 4 of 6
This guide provides comprehensive, step-by-step instructions for diagnosing and removing a stuck bathtub drain stopper assembly. The process involves identifying the stopper type, using lubricants to loosen it, disassembling the components, cleaning out hair and soap scum, and properly reassembling the unit.
Frequently Asked Questions
How long should I wait for the penetrating lubricant (like Blaster PB Penetrating Oil) to work, and what if the stopper is still stuck afterward?
Allow the penetrating oil to soak for at least 15-30 minutes, or even a few hours for severely stuck components. If it's still stuck, reapply the lubricant, gently tap around the area with a rubber mallet, and try again. Avoid excessive force to prevent damaging the plumbing.
Do I really need specialized tools like the FlexiSnake Drain Millipede for cleaning, or can I use common household items for removing hair clogs?
While the FlexiSnake is highly effective for reaching deep clogs, you can often use a pair of needle-nose pliers or even a straightened wire coat hanger to carefully fish out hair and debris closer to the drain opening. Always wear gloves and properly dispose of the gunk you remove.
What essential safety precautions should I take when working on a dirty bathtub drain, especially regarding old gunk and chemicals?
Always wear protective gloves (rubber or nitrile) and safety glasses to shield yourself from drain gunk, potential splashing, and penetrating oils. Ensure good ventilation, especially when using lubricants, and have old towels ready to contain any mess.
The project is listed as 'beginner,' but what should I do if the stopper's set screw is stripped or the components are heavily corroded and won't budge?
If the screw is stripped, you might need a screw extractor kit or try using a Dremel to cut a new slot for a flathead screwdriver. For heavy corrosion, apply more penetrating oil and allow extra soaking time, gently wiggling the parts. If it still won't move, consider calling a professional to avoid damaging the plumbing.