Lift and Remove the Tub — Prepare the Work Area
Part of project
How to Remove a Stuck Bathtub Drain Stopper Assembly · Step 1 of 6
In this video
With the plumbing obstruction removed, the bathtub is ready to be taken out. With a helper, lift the tub straight up and level to clear the floor. Once lifted, roll the front of the tub forward and rest the back edge on the horizontal 2x4 bracing inside the wall. From this position, you can safely slide the tub completely out of the alcove and into the main bathroom area for disposal.
Goal: Remove bathtub from alcove
- This step requires at least two people. Steel tubs are very heavy and awkward to handle.
Used in this video
- Work Gloves (Safety Gear: Gloves) — Maintaining a secure grip on the heavy bathtub and protecting hands.
3.7M subscribers
FAQs
How long should I wait for the penetrating lubricant (like Blaster PB Penetrating Oil) to work, and what if the stopper is still stuck afterward?
Allow the penetrating oil to soak for at least 15-30 minutes, or even a few hours for severely stuck components. If it's still stuck, reapply the lubricant, gently tap around the area with a rubber mallet, and try again. Avoid excessive force to prevent damaging the plumbing.
Do I really need specialized tools like the FlexiSnake Drain Millipede for cleaning, or can I use common household items for removing hair clogs?
While the FlexiSnake is highly effective for reaching deep clogs, you can often use a pair of needle-nose pliers or even a straightened wire coat hanger to carefully fish out hair and debris closer to the drain opening. Always wear gloves and properly dispose of the gunk you remove.
What essential safety precautions should I take when working on a dirty bathtub drain, especially regarding old gunk and chemicals?
Always wear protective gloves (rubber or nitrile) and safety glasses to shield yourself from drain gunk, potential splashing, and penetrating oils. Ensure good ventilation, especially when using lubricants, and have old towels ready to contain any mess.
The project is listed as 'beginner,' but what should I do if the stopper's set screw is stripped or the components are heavily corroded and won't budge?
If the screw is stripped, you might need a screw extractor kit or try using a Dremel to cut a new slot for a flathead screwdriver. For heavy corrosion, apply more penetrating oil and allow extra soaking time, gently wiggling the parts. If it still won't move, consider calling a professional to avoid damaging the plumbing.
Lift and Remove the Tub — Prepare the Work Area
Part of project
How to Remove a Stuck Bathtub Drain Stopper Assembly · Step 1 of 6
In this video
With the plumbing obstruction removed, the bathtub is ready to be taken out. With a helper, lift the tub straight up and level to clear the floor. Once lifted, roll the front of the tub forward and rest the back edge on the horizontal 2x4 bracing inside the wall. From this position, you can safely slide the tub completely out of the alcove and into the main bathroom area for disposal.
Goal: Remove bathtub from alcove
- This step requires at least two people. Steel tubs are very heavy and awkward to handle.
Used in this video
- Work Gloves (Safety Gear: Gloves) — Maintaining a secure grip on the heavy bathtub and protecting hands.
Frequently Asked Questions
How long should I wait for the penetrating lubricant (like Blaster PB Penetrating Oil) to work, and what if the stopper is still stuck afterward?
Allow the penetrating oil to soak for at least 15-30 minutes, or even a few hours for severely stuck components. If it's still stuck, reapply the lubricant, gently tap around the area with a rubber mallet, and try again. Avoid excessive force to prevent damaging the plumbing.
Do I really need specialized tools like the FlexiSnake Drain Millipede for cleaning, or can I use common household items for removing hair clogs?
While the FlexiSnake is highly effective for reaching deep clogs, you can often use a pair of needle-nose pliers or even a straightened wire coat hanger to carefully fish out hair and debris closer to the drain opening. Always wear gloves and properly dispose of the gunk you remove.
What essential safety precautions should I take when working on a dirty bathtub drain, especially regarding old gunk and chemicals?
Always wear protective gloves (rubber or nitrile) and safety glasses to shield yourself from drain gunk, potential splashing, and penetrating oils. Ensure good ventilation, especially when using lubricants, and have old towels ready to contain any mess.
The project is listed as 'beginner,' but what should I do if the stopper's set screw is stripped or the components are heavily corroded and won't budge?
If the screw is stripped, you might need a screw extractor kit or try using a Dremel to cut a new slot for a flathead screwdriver. For heavy corrosion, apply more penetrating oil and allow extra soaking time, gently wiggling the parts. If it still won't move, consider calling a professional to avoid damaging the plumbing.