Remove Old Overflow Plate — Remove the Overflow Plate
Part of project
How to Remove a Stuck Bathtub Drain Stopper Assembly · Step 2 of 5
In this video
Begin by removing the old overflow plate. Using a flathead screwdriver, unscrew the two visible screws holding the plate to the tub wall. Loosen them completely and pull them out. Then, gently pull the old plate away from the tub to remove it.
Goal: Remove the existing overflow plate
- Be careful not to drop the screws down the drain once they are loose.
Used in this video
- Flathead Screwdriver (brand: Kobalt, Tool Type: Hand tools, Power Source: Manual) — Unscrewing the old overflow plate screws
2.2M subscribers
FAQs
What if my bathtub drain stopper isn't a trip-lever style, or I don't see an overflow plate?
This guide specifically addresses trip-lever style stoppers, identifiable by the lever on the overflow plate. If you have a different type (e.g., push-pull, toe-touch, pop-up), the removal method will vary, usually involving unscrewing or lifting the stopper directly from the drain. You'll need to identify your stopper type first, as the access point will be different.
Do I really need specific tools like the HDX 6-in-1 screwdriver, or can I use other screwdrivers?
While the HDX 6-in-1 is recommended for its versatility, any Phillips head screwdriver of appropriate size will work to remove the overflow plate screws. Ensure it fits snugly to prevent stripping the screw heads, which can significantly complicate removal. A flathead might also be needed if your overflow plate uses slotted screws.
How can I prevent stripping the screws when removing the overflow plate, especially if they're old?
Use a screwdriver that fits snugly into the screw head to ensure maximum contact and apply firm, steady pressure while turning counter-clockwise. If the screws are corroded, apply a penetrating lubricant and let it sit for 15-30 minutes before attempting to unscrew them. If a screw does strip, you might need a screw extractor kit.
The project is rated 'beginner' and '2 hours.' What might make it take longer for a novice?
The 2-hour estimate assumes typical conditions. Corrosion can make screws difficult to remove or linkage components hard to separate, extending your time. If the linkage is broken deep inside the drain, retrieval might require additional tools or creativity, potentially increasing the project duration to 3-4 hours.
Remove Old Overflow Plate — Remove the Overflow Plate
Part of project
How to Remove a Stuck Bathtub Drain Stopper Assembly · Step 2 of 5
In this video
Begin by removing the old overflow plate. Using a flathead screwdriver, unscrew the two visible screws holding the plate to the tub wall. Loosen them completely and pull them out. Then, gently pull the old plate away from the tub to remove it.
Goal: Remove the existing overflow plate
- Be careful not to drop the screws down the drain once they are loose.
Used in this video
- Flathead Screwdriver (brand: Kobalt, Tool Type: Hand tools, Power Source: Manual) — Unscrewing the old overflow plate screws
Frequently Asked Questions
What if my bathtub drain stopper isn't a trip-lever style, or I don't see an overflow plate?
This guide specifically addresses trip-lever style stoppers, identifiable by the lever on the overflow plate. If you have a different type (e.g., push-pull, toe-touch, pop-up), the removal method will vary, usually involving unscrewing or lifting the stopper directly from the drain. You'll need to identify your stopper type first, as the access point will be different.
Do I really need specific tools like the HDX 6-in-1 screwdriver, or can I use other screwdrivers?
While the HDX 6-in-1 is recommended for its versatility, any Phillips head screwdriver of appropriate size will work to remove the overflow plate screws. Ensure it fits snugly to prevent stripping the screw heads, which can significantly complicate removal. A flathead might also be needed if your overflow plate uses slotted screws.
How can I prevent stripping the screws when removing the overflow plate, especially if they're old?
Use a screwdriver that fits snugly into the screw head to ensure maximum contact and apply firm, steady pressure while turning counter-clockwise. If the screws are corroded, apply a penetrating lubricant and let it sit for 15-30 minutes before attempting to unscrew them. If a screw does strip, you might need a screw extractor kit.
The project is rated 'beginner' and '2 hours.' What might make it take longer for a novice?
The 2-hour estimate assumes typical conditions. Corrosion can make screws difficult to remove or linkage components hard to separate, extending your time. If the linkage is broken deep inside the drain, retrieval might require additional tools or creativity, potentially increasing the project duration to 3-4 hours.