Skip to main content
Stesso
Project

Remove handle — Remove the Shower Faucet Handles

Beginner2 hours

Part of project

Fix a Leaky Shower Faucet: Stop Dripping Shower Head · Step 2 of 5

Helpful?

In this video

Use an Allen wrench to remove the screw holding the handle in place. Carefully pry off the decorative cap covering the screw with a small screwdriver or a sharp pick. Gently lift the handle off the faucet.

Goal: Access internal faucet components.

  • Be careful not to scratch the faucet finish when removing the handle. Use metric Allen wrenches if standard sizes don't fit.

Used in this video

  • Allen wrench (Allen Wrench/Hex Key: Various sizes) — Removing the handle screw
  • Screwdriver (Screwdriver_Type: Flathead) — Removing the cap
102.1K views5715 minutes
Everyday Home Repairs

1.1M subscribers

View Channel

FAQs

What should I do if I can't find the main water shut-off valve or if it doesn't work properly?

If you cannot locate your home's main water shut-off valve, look for an exterior spigot or contact your water utility for guidance on its location. If the valve is stuck or doesn't fully stop the water flow, avoid forcing it to prevent damage. In such cases, it's best to consult a plumber to ensure the water supply is safely and completely shut off before proceeding with repairs.

How do I ensure I purchase the correct replacement O-rings, washers, or cartridge for my specific faucet model?

Before buying replacement parts, disassemble the faucet and remove the old components. Bring the worn O-rings, washers, or the entire cartridge to a hardware store to ensure an exact match. Knowing your faucet's brand and model number can also greatly assist store associates in finding the correct parts.

My shower faucet is still dripping after I replaced the parts. What are the common troubleshooting steps?

First, double-check that all new components, especially O-rings and washers, are correctly seated and securely tightened without over-tightening. Ensure the cartridge is fully engaged and aligned properly. Sometimes, the valve seat itself might be corroded or damaged, requiring specific tools for replacement, or the new parts might be faulty.

How much money can I expect to save by fixing a leaky shower faucet myself compared to hiring a plumber?

DIY repair costs are usually limited to new O-rings, washers, or a cartridge, typically ranging from $5 to $30 depending on your faucet type. Hiring a professional plumber for this specific repair can cost anywhere from $100 to $300 or more, making DIY a significant cost-saving option if you're comfortable with basic plumbing tasks.

Transcript
Hide

just to be safe um i need two allen wrenches i actually had to go and buy some metric ones um so i needed uh three and a two and a half so hopefully those will work for you as well um the way that this is gonna work is we're gonna come over here and right underneath here you can kind of see this uh this little like sticker thing um plug maybe and we're gonna just kind of use a small um i got a little jeweler set screwdriver to help me get that out i'm just going to very gently so i don't scratch the black um kind of pop that out all right so i got that that little piece out it's a little black thing um and if you look back in there you'll see that there's a little tiny screw and this is where your two and a half allen wrench is going to work so i'm just going to get that back in there and pull that screw out screws out so i'm just going to lift gently on the handle here it'll pop right off you can see that the screw kind of fell right in there so i'll get that out i can there we go and here's the top of your

Auto-generated transcript. May contain errors.