Skip to main content
Stesso
Project

Turn Off Water Supply — Shut Off the Shower's Water Supply

Beginner2 hours

Part of project

Delta Shower Trim Kit Installation: A Step-by-Step DIY Guide · Step 1 of 4

Helpful?

In this video

Turn off the water supply lines to the old faucet. These are usually located underneath the sink. Turn the valves clockwise to shut them off. Test to make sure no water comes out.

Goal: Prevent water from leaking when disconnecting the old faucet.

  • If there are no supply line shut-off valves under the sink, locate and turn off the main water supply to the house before proceeding.
31.1K views1695 minutes
Everyday Home Repairs

1.1M subscribers

View Channel

FAQs

What is the most crucial first step before beginning the Delta shower trim installation, and what happens if I skip it?

You absolutely must shut off the main water supply to your shower, or ideally your entire house, before starting. Skipping this step will result in an immediate and significant flood once you begin removing the old trim, causing potential water damage and making the job impossible to complete safely.

Besides a multi-screwdriver, are there any other tools or materials I might unexpectedly need for this Delta shower trim kit installation?

While a multi-screwdriver is primary, a utility knife is very helpful for scoring old caulk around the escutcheon plate. You might also want a rag and cleaner to prepare the surface, and a tube of silicone caulk to create a watertight seal around the new escutcheon plate after installation.

The project is listed as 'beginner' and '2 hours.' What factors could make this Delta trim installation more difficult or take longer than expected for a DIY novice?

While generally straightforward, unforeseen issues like stripped screws on the old trim, excessive corrosion preventing removal, or an unfamiliar internal valve setup can increase difficulty and time. Ensuring you have the correct Delta trim kit model for your existing Delta valve is also critical, as incompatible parts will cause delays.

My current shower valve isn't Delta, or it's a very old Delta model. Can I still use a new Delta shower trim kit?

No, Delta shower trim kits are designed to fit specific Delta universal rough-in valves or proprietary older Delta valve bodies. If your existing valve is from another brand, or a pre-1990s Delta valve that isn't compatible, you will likely need to replace the entire valve behind the wall, which is a much more complex plumbing project.

Transcript
Hide

like a maraca the first thing you want to do before you uninstall the old faucet is to shut off the water the most likely place that you'll want to do that is underneath the sink itself there's a couple of supply lines it goes up to the sink faucet there's one there that goes to the hot this right here and basically just turn the valve to show off the water and here's the other one and this one is for the cold water now if you don't have supply line shutoff valves underneath your sink you're gonna want to shut off the main water supply that's in your house now that we've shut off the water we want to make sure that there's no remaining water pressure in the faucet and you can see here it's dripping a little bit but pretty much all of it shut off it's always good to stay in a check to make sure the water is off before you undo any fixtures because if

Auto-generated transcript. May contain errors.