Skip to main content
Stesso
Project

Shut Off Water Supply — Turn Off the Water Supply

Beginner

Part of project

Leaky Faucet Handle Repair & Replacement: A Step-by-Step Guide · Step 1 of 4

Helpful?

In this video

Before starting any work, go underneath the sink and locate the hot and cold water shut-off valves. Turn both valves clockwise until they are fully closed to stop the water flow to the faucet. After shutting off the water, turn the faucet handles on to drain any remaining water and relieve pressure in the lines.

Goal: Water Shut-Off

407.9K views3.1K2 minutes
The Home Depot

623K subscribers

View Channel

FAQs

What is the most critical safety step I need to take before starting this repair?

Always turn off the hot and cold water supply valves located directly under the sink before you begin. This prevents unexpected water flow and potential flooding, ensuring a safe and mess-free repair.

Do I need the exact tools listed (Husky Pliers, HDX Screwdriver), or can I use alternatives?

The listed tools are recommended for efficiency and proper fit, but a standard adjustable wrench or pliers and a multi-bit screwdriver set can often work. Ensure your tools fit properly to prevent stripping screws or damaging faucet components.

How long does a beginner typically take to complete this repair, and what's the approximate cost of parts?

For a beginner, this repair usually takes 30-60 minutes. Replacement cartridges typically cost $10-$30, and O-ring kits are generally less than $10, making it a very affordable DIY project.

Are all faucet cartridges universal, or do I need to find a specific type for my faucet?

Faucet cartridges are not universal; they are specific to the faucet brand and model. It's crucial to remove your old cartridge first and take it to a hardware store, or use its identifying marks to find the correct replacement.

Transcript
Hide

Silicone grease is optional, but it helps to put the cartridge in. As you can see here, the water is still on, you're going to need to go under the sink and turn it off before you start new work. Let's get to it. Under the sink is where you can turn off the hot and cold water. I've already repaired my cold, so here we're going to replace the hot water. Yes, I see the water leaking. That's probably going to be another project. Now that we've insured the water's off, it's time to take off the handle.

Auto-generated transcript. May contain errors.