Skip to main content
Stesso
Project

Reinstall the Showerhead — Clean the Shower Arm Threads

Beginner

Part of project

Rain Shower Head Installation: Low Water Pressure Solution · Step 3 of 5

Helpful?

In this video

Take the clean showerhead back to the shower. Before reinstalling, it's recommended to wrap the threads of the shower arm with Teflon tape to ensure a watertight seal. Screw the clean showerhead back onto the shower arm by hand, tightening it until it is snug. Turn on the water to test the showerhead and check for leaks. The water flow should be greatly improved and the spray pattern restored.

Goal: Showerhead Installation

  • Always wrap the threads of the shower arm with Teflon tape before installing a showerhead to prevent leaks.
655.8K views5.5KPT2M
Lowe's Home Improvement

1.3M subscribers

View Channel

FAQs

How does installing a new rain shower head specifically address low water pressure?

While a new rain shower head itself doesn't increase your home's overall water pressure, many modern rain heads are designed with wider spray patterns that can make low pressure feel more substantial. Additionally, some rain shower heads have removable flow restrictors that, when carefully removed (and if permitted by local codes), can significantly improve water flow for a better shower experience.

Besides an adjustable wrench, are there other essential tools or materials I'll need for a leak-free installation?

Yes, Teflon tape (also known as plumber's tape) is crucial for creating a watertight seal. You'll wrap it clockwise around the shower arm threads 3-5 times before installing the new shower head. A soft cloth or old towel is also helpful for cleaning threads and protecting your new fixture.

Why is it so important to turn off the main water supply before starting, and how do I do it safely?

Turning off the main water supply is vital to prevent flooding and ensure you can work safely without water spraying during the installation. Locate your home's main water shut-off valve, typically in the basement, utility closet, or near your water meter, and turn it clockwise until the water flow stops completely.

What happens if I overtighten the new rain shower head, and how can I avoid it?

Overtightening can strip the threads on your existing shower arm or the new shower head, leading to persistent leaks or costly damage requiring professional repair. To avoid this, hand-tighten the shower head until it's snug, then use an adjustable wrench for just an additional quarter to half turn, stopping as soon as it feels secure.

Transcript
Hide

to do these when you have hard water okay here we are at the apartment again I've got my cleaned up showerhead I'm just going to go ahead and thread it back on by hand because in this plastic one I did not put any more Teflon sealing through there so you might get a little bit of loop around there well this is more for demonstration okay there we go I'm going to back up a little bit so we don't get the camera what I'll zoom in but let's get out of course fantastic a little blow by the back there I need to take it put some tough lot in there but the stream itself very nice hey I hope this helps save a lot of money that for just pennies get things working like news this helps you and you like my video it hit like and subscribe thanks for watching

Auto-generated transcript. May contain errors.