Skip to main content
Stesso
Project

Remove old showerhead — Remove the Old Shower Hardware

Beginner

Part of project

Shower Hardware Replacement: A Step-by-Step DIY Guide · Step 2 of 4

Helpful?

In this video

Remove the old showerhead using an adjustable wrench (Channel Lock pliers). Turn the nut counter-clockwise to loosen it. Be careful not to scratch the showerhead finish.

Goal: Showerhead Removal (Standard)

Used in this video

  • Adjustable Wrench (brand: Channel Lock, Tool Type: Adjustable Wrench, Power Source: Manual, Material Compatibility: Metal, Plastic, Chrome, Size/Capacity: Medium, Durability: High, Cost: Low, Special Features: Adjustable jaws) · optional — loosening the showerhead
255.0K views20.5K1 minute
Dad, how do I?

5.2M subscribers

View Channel

FAQs

How long should a beginner expect this shower hardware replacement project to take?

For a beginner, this project typically takes about 30-60 minutes from start to finish. This includes turning off the water, removing old hardware, applying tape, installing new parts, and thoroughly checking for leaks. Taking your time is key to avoid mistakes.

What's the most critical step to ensure I don't damage my plumbing or new hardware during this replacement?

The most critical steps are completely turning off the water supply before starting and avoiding over-tightening the new components. Over-tightening can strip threads, crack fixtures, or cause future leaks. Use gentle but firm pressure with your adjustable wrench.

I've installed my new shower hardware, but it's leaking. What are the most common causes and how do I fix them?

Leaks usually stem from insufficient Teflon tape or cross-threaded connections. First, turn off the water supply immediately. Then, carefully re-remove the leaking component, apply 3-5 layers of Teflon tape clockwise to the threads, and re-install, ensuring it threads on smoothly before gently tightening again.

Do I need the exact Husky adjustable wrench mentioned, or will any adjustable wrench work for this project?

While the Husky wrench is a recommended tool, any standard adjustable wrench of an appropriate size (e.g., 10-12 inches) will work for this project. The most important thing is to ensure it has smooth jaws to prevent scratching the finish of your new hardware. Remember to also use a cloth for added protection.

Transcript
Hide

show you what mine looks like so mine actually has that just this rubber boot that's just cosmetic and that's just covering up um this nut right here right that i'm just gonna have to loosen so all i'm gonna do and if you're concerned about this you could wrap this with a cloth i'm not concerned about it because it's all covered anyway but you could wrap you know this thing with a cloth and then um then loosen it but anyways we're just gonna get a let's see a grip on it and then loosen it like that and then i should just be able to take it off by hand

Auto-generated transcript. May contain errors.