Re-lay and Level Pavers — Re-level and Set Pavers

Beginner2 mins

Part of project

How to Level a Sinking Paver Step · Step 3 of 4

Helpful?

In this video

Begin re-laying the pavers on top of the permeable fabric and a fresh layer of leveling sand. As you lay the pavers, adjust the sand beneath them as needed to achieve the desired height and level. The narrator points out that the pavers should be set approximately 1/4 inch high before compaction, as they will settle flush once tamped down. For areas that are too low, add more sand. Use a wood block and a hammer to gently tap pavers into place and achieve a level surface without damaging the pavers directly. This iterative process of laying, checking level, adjusting sand, and tapping is key to a stable and even patio.

41.2K views1.2K

Transcript

Hide

initial settlement in the first place. All right, we're resetting the pavers and I want to look at one side from the other. This side is just about a/4 inch high right here because when we go to tamp it down, it's going to tamp flush. This side is actually just a little bit too low at this point. So when we go to tamp this down, if we have these blocks perfectly flush, they're going to be below the level we want to be at. So Thomas is pulling these out and adding just a little bit of sand to raise them up. So when we tamp this down, we're exactly where we want to be at. Never pound directly on your pavers with a steel mallet or hammer. It will crack and bust them. Just use a wood block as a cushion in between. Now, I started experimenting with Sakrete's pave set and found out that I absolutely love this material, but it is not a one and you're done. meaning you can't put this in and leave it for years and years without maintenance. I just called Lowe's and asked them if they have paver set because that's the material I want to use to rebuild this patio with. They told me they didn't have it on hand, but I got a weird feeling from talking to them that they just didn't know exactly what I was looking for. So, I decided to drive down and search for it on my own. I like it because with this stuff, it'll last much longer than any other material, but you will have to refresh this every 2 to 3 years. But still, the benefits of using this material over standard sand has changed my opinion on using a poly sand material here.

Auto-generated transcript. May contain errors.

Re-lay and Level Pavers — Re-level and Set Pavers

Advanced

2 days

Part of project

How to Level a Sinking Paver Step · Step 3 of 4

Was this clip helpful?

In this video

Begin re-laying the pavers on top of the permeable fabric and a fresh layer of leveling sand. As you lay the pavers, adjust the sand beneath them as needed to achieve the desired height and level. The narrator points out that the pavers should be set approximately 1/4 inch high before compaction, as they will settle flush once tamped down. For areas that are too low, add more sand. Use a wood block and a hammer to gently tap pavers into place and achieve a level surface without damaging the pavers directly. This iterative process of laying, checking level, adjusting sand, and tapping is key to a stable and even patio.

41.2K views1.2K

Video Transcript

(1,541 characters)

Hide

initial settlement in the first place. All right, we're resetting the pavers and I want to look at one side from the other. This side is just about a/4 inch high right here because when we go to tamp it down, it's going to tamp flush. This side is actually just a little bit too low at this point. So when we go to tamp this down, if we have these blocks perfectly flush, they're going to be below the level we want to be at. So Thomas is pulling these out and adding just a little bit of sand to raise them up. So when we tamp this down, we're exactly where we want to be at. Never pound directly on your pavers with a steel mallet or hammer. It will crack and bust them. Just use a wood block as a cushion in between. Now, I started experimenting with Sakrete's pave set and found out that I absolutely love this material, but it is not a one and you're done. meaning you can't put this in and leave it for years and years without maintenance. I just called Lowe's and asked them if they have paver set because that's the material I want to use to rebuild this patio with. They told me they didn't have it on hand, but I got a weird feeling from talking to them that they just didn't know exactly what I was looking for. So, I decided to drive down and search for it on my own. I like it because with this stuff, it'll last much longer than any other material, but you will have to refresh this every 2 to 3 years. But still, the benefits of using this material over standard sand has changed my opinion on using a poly sand material here.

Transcript may be auto-generated and contain errors.