Cut Edge Pavers and Cure — Cut Pavers for Edges and Risers
Part of project
How to Build Paver Steps into a Hill · Step 7 of 11
In this video
For areas where full pavers don't fit, such as around the edges, walls, or steps, you will need to cut the pavers to size. Measure the required dimensions, mark the pavers, and use a wet saw or angle grinder with a diamond blade for precise and clean cuts. Carefully place the cut pavers into position. Once all pavers, including the cut pieces, are laid and glued, allow the adhesive to fully cure according to manufacturer specifications, typically 24-48 hours.
Cut Edge Pavers and Cure — Cut Pavers for Edges and Risers
Part of project
How to Build Paver Steps into a Hill · Step 7 of 11
In this video
For areas where full pavers don't fit, such as around the edges, walls, or steps, you will need to cut the pavers to size. Measure the required dimensions, mark the pavers, and use a wet saw or angle grinder with a diamond blade for precise and clean cuts. Carefully place the cut pavers into position. Once all pavers, including the cut pieces, are laid and glued, allow the adhesive to fully cure according to manufacturer specifications, typically 24-48 hours.