Skip to main content
Stesso
BrowseFeedExpertsMy Projects
Log inSign up
Stesso

Step 8 · Connect Gas Line and Venting (Gas Heaters)

For gas water heaters, connect the gas supply line to the gas control valve on the new unit. Use approved pipe thread sealant suitable for natural gas or propane. Make sure to use a flexible gas connector if required or permitted by local code. After connecting the gas line, reattach the vent pipe (flue) to the draft hood on top of the water heater. Ensure the vent pipe has the correct slope (typically rising towards the chimney or vent termination) and is securely fastened to prevent leaks. Check for any obstructions in the vent pipe. Test all gas connections for leaks using a soapy water solution; bubbles indicate a leak that must be fixed.

Stesso home
SearchSearchBrowseBrowseFeedFeedMy ProjectsMy Projects
Log inLog inSign upSign up

Step 8 · Connect Gas Line and Venting (Gas Heaters)

For gas water heaters, connect the gas supply line to the gas control valve on the new unit. Use approved pipe thread sealant suitable for natural gas or propane. Make sure to use a flexible gas connector if required or permitted by local code. After connecting the gas line, reattach the vent pipe (flue) to the draft hood on top of the water heater. Ensure the vent pipe has the correct slope (typically rising towards the chimney or vent termination) and is securely fastened to prevent leaks. Check for any obstructions in the vent pipe. Test all gas connections for leaks using a soapy water solution; bubbles indicate a leak that must be fixed.

Videos for this step

Connect Gas Line and VentConnect Gas Line and Vent PipeConnect Gas Supply Line

Tools and Materials

← Project

Water Heater Installation

Step 8 of 13·3.4 hr left

Turn Off Utilities
15 minutes2 items
Drain the Old Water Heater
60 minutes3 items
Disconnect Plumbing and Venting
30 minutes3 items
Remove Old Water Heater
20 minutes2 items
Prepare the Installation Area
30 minutes2 items
Position the New Water Heater
20 minutes2 items
Connect Water Lines
30 minutes3 items
8
Connect Gas Line and Venting (Gas Heaters)
45 minutes5 items
9
Connect Electrical Wiring (Electric Heaters)
30 minutes3 items
10
Fill the New Water Heater
20 minutes1 items
11
Restore Utilities and Test
60 minutes2 items
12
Install Temperature and Pressure Relief Valve (T&P Valve)
20 minutes3 items
13
Final Inspection and Cleanup
30 minutes1 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.