Skip to main content
Stesso
BrowseFeedExpertsMy Projects
Log inSign up
Stesso

Step 6 · Sand and Prepare for Finishing

Once the wood filler is completely dry, use fine-grit sandpaper (120-180 grit) to lightly sand all the shoe molding, paying special attention to the areas where nail holes were filled. Feather the edges of the filled areas so they blend seamlessly with the molding. Wipe away all sanding dust with a clean cloth or tack cloth.

Stesso home
SearchSearchBrowseBrowseFeedFeedMy ProjectsMy Projects
Log inLog inSign upSign up

Step 6 · Sand and Prepare for Finishing

Once the wood filler is completely dry, use fine-grit sandpaper (120-180 grit) to lightly sand all the shoe molding, paying special attention to the areas where nail holes were filled. Feather the edges of the filled areas so they blend seamlessly with the molding. Wipe away all sanding dust with a clean cloth or tack cloth.

Videos for this step

Fill and Sand Molding GapsSand Filled Areas SmoothSand for Seamless Finish

Tools and Materials

← Project

How to Install Shoe Molding Along Stair Treads

Step 6 of 7·45 min left

Measure and Cut Shoe Molding for First Tread
10 minutes4 items
Test Fit and Adjust First Piece of Molding
5 minutes3 items
Fasten First Piece of Shoe Molding
10 minutes4 items
Repeat for Remaining Stair Treads
60 minutes6 items
Fill Nail Holes
15 minutes3 items
6
Sand and Prepare for Finishing
15 minutes3 items
7
Apply Finish (Paint or Stain)
30 minutes4 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.