Skip to main content
Stesso
BrowseFeedExpertsMy Projects
Log inSign up
Stesso

Step 3 · Fasten First Piece of Shoe Molding

Once the first piece of shoe molding is properly fitted, use a brad nailer or hammer to drive 18-gauge brad nails through the molding and into the stair tread and riser. Aim to place nails approximately every 12-16 inches along the length of the molding. Ensure the nail heads are set slightly below the surface of the molding so they can be easily filled.

Stesso home
SearchSearchBrowseBrowseFeedFeedMy ProjectsMy Projects
Log inLog inSign upSign up

Step 3 · Fasten First Piece of Shoe Molding

Once the first piece of shoe molding is properly fitted, use a brad nailer or hammer to drive 18-gauge brad nails through the molding and into the stair tread and riser. Aim to place nails approximately every 12-16 inches along the length of the molding. Ensure the nail heads are set slightly below the surface of the molding so they can be easily filled.

Videos for this step

Nailing Shoe MoldingInstall Shoe MoldingFasten Shoe Molding

Tools and Materials

← Project

How to Install Shoe Molding Along Stair Treads

Step 3 of 7·2.2 hr left

Measure and Cut Shoe Molding for First Tread
10 minutes4 items
Test Fit and Adjust First Piece of Molding
5 minutes3 items
3
Fasten First Piece of Shoe Molding
10 minutes4 items
4
Repeat for Remaining Stair Treads
60 minutes6 items
5
Fill Nail Holes
15 minutes3 items
6
Sand and Prepare for Finishing
15 minutes3 items
7
Apply Finish (Paint or Stain)
30 minutes4 items
Prev
Next
TermsPrivacySafetyLegal© 2026 Stesso, Inc.