Step 6 · Final Checks and Testing
Double-check that all water connections are snug. Slowly turn the water supply valve back on (counter-clockwise). Carefully inspect all connection points—at the valve, the T-adapter, and the bidet inlet—for any drips or leaks. Use a dry towel or paper towel to wipe each connection to make it easier to spot slow drips. If there are no leaks, plug the bidet's power cord into the GFCI outlet. The bidet may make some initial noises as it fills its internal reservoir. Using the remote or side control panel, test the basic functions like the nozzle spray and dryer to ensure everything is working correctly.
Tools and Materials
PrevNext